AlgoTron DSP Software for Telecoms & Audio
a TI DSP Third Party Network Member

Home Modems Telephony Audio Utilities Consultancy Glossary Index Contact us

Home
Modems
Telephony
Audio
Utilities
Consultancy
Glossary
Index
Contact us


       

Bell 202 Modem TMS320C5000 DSP Code

Description: implements the data pump function of the modem Bell 202. This provides half-duplex data transmission over 2 wires or full-duplex over 4 wires at two rates, one 1800b/s and the other 1200b/s, over the telephone network. The assembler software is operated by callable subroutines, eg for initialisation and for per-sample processing of input/output samples and data. The user is responsible for interfacing samples and data to hardware.
         In the assembler interface, the code is re-entrant to facilitate multi-channel operation. A C-callable wrapper can also be provided, allowing individual channels to be called from C to process multiple sample blocks. A comprehensive user's guide together with example application files are provided with the code. Test results are available. A stripped down version is available for Caller Identification (CID) use.

Interfaces: at the sample interface, the code can operate at 8.0kHz and 9.6kHz sample rates. At the data interface, operation can be in either Asynchronous or Synchronous mode. In Asynchronous mode, data is transferred with start & stop bits auto-inserted/-deleted. In Synchronous mode, data is transferred transparently, with the receiver performing clock recovery on bit transitions. In both cases, the data can be passed in multiple-bit blocks, and the nominal clock used is set to 1800Hz or 1200Hz.
         At the control interface, the assembler code has one 16-bit control word to sequence operation and to set operating parameters such as data size, and one diagnostic word to convey data transfer status such as ready-to-send and line-signal-detected. With the C wrapper, control and diagnostics are provided by routine call arguments and returned values.

Performance:

  • SNR for 10-6 error rate at 1200b/s (4kHz BW noise): 12.0dB - Flat Channel
  • SNR for 10-4 error rate at 1800b/s (4kHz BW noise): 23.5dB - Flat Channel

Processor Load:

Sample rate MIPS# Data memory (words) Prog memory (words)#
8.0kHz 2.4 49 0.5k
9.6kHz 2.9

- #figures are for TMS320C54x operation with the assembler interface

Availability: NOW - sale is under licence - integration support offered

 
Home Modems Telephony Audio Utilities Consultancy Glossary Index Contact us